A blog post

How to Choose Best WiFi Routers?

It is quite common, at home as well as in the office and in the company, the need to increase the WiFi indication by increasing the protection of the device wi-fi router. The product to which you instantly look is the WiFi repeater, otherwise known as variety stretcher.

Before calling a WiFi repeater it is important to check the placement of the WiFi wi-fi router that should preferably be set up during the developing to be protected, never in subterranean surroundings, in large areas free of “important” barriers: for example, a very high level of consumption of strengthened tangible surfaces, plasterboard subdivisions, geographical charts, documents and forums and steel components.

The WiFi wi-fi router should preferably 192.168.0.1 Login┬ábe placed at the middle of the developing and on the first floor if you need to use an underground room and top floor as well. Some useful suggestions to increase the protection of the router’s WiFi indication before getting focused on the WiFi repeaters are released in our article WiFi Signal how to increase it and enhance protection.
The WiFi repeater is a system that allows you to increase the WiFi indication and enhance protection but most of the time change the wi-fi route used on the wi-fi router, select the 2.4 GHz as a regularity group instead of the 5 GHz (greater protection distance of reduced bandwidth rates), improving the placement of the tool and the alignment of the antennas ( How to select a WiFi aerial ) already allows a lot.

What functions should they have?

The WiFi repeater itself is a very simple device: settings can be executed – after link to the power lines – either via WiFi or via Ethernet wire (in the case of gadgets that contain at least one RJ-45 port).

Since each WiFi repeater must get in touch to a walls outlet, some of them integrate a through-socket that allows the relationship, downstream, of other gadgets.

Whether you link for the first settings via WiFi (using the factors written on the brand used on the back of the repeater) or you use the Ethernet wire, you can accessibility the management board by writing http://192.168.1.1 or http : //192.168.0.1 in the web browser’s deal with bar. It is the best there are prevents having to set up ineffective or completely optionally available software.

reply